December 12, 2015

Day 12 - Introduction to Nomad

Written by: Patrick O'Connor (@dontrebootme)
Edited by: Justin Garrison (@rothgar)

Introducing Cluster Schedulers

Are you still running all of your containers with a single DOCKER_HOST? Have you managed to spread the load between two or three hosts but manually call docker run commands on each host to bootstrap your container infrastructure? If so, you should consider using a container scheduler instead.

Fleet, Kubernetes, Mesos, Nomad, Rancher, and Swarm are probably names you've heard of recently but are you familiar with what they actually do? Schedulers provide many benefits in a containerized environment. They are the next big step once you've played with a local development environment or when you are going to deploy your CI/CD pipeline. Container schedulers vary in their features and implementation but some of the core principles are the same.

  • Pool resources from a group of hosts into their components (CPU/RAM) and make them available for consumption. Also make sure the resources don't become exhausted via over-provisioning or host failure.
  • Service supervision provides a service load balancer/entry point and make sure the service remains running.
  • Scaling functionality scales a service (automatic or manually) by allowing an operator to create more or fewer instances.
  • System metadata provides stats about running instances, scheduling, and container health.

Running a scheduler has obvious benefits over running containers by hand, but to run some of these schedulers requires a long list of dependencies that are not trivial to set up and maintain. Enter Hashicorp's Nomad, from the team that brought you Consul, Vagrant, Packer, Terraform, Vault, and recently Otto. Nomad attempts to give you all of the container scheduler benefits without any of the complexity. It is a single binary and optional config file making it simple to deploy and get started. You don't need to make any changes to your existing containers and can get started with just a few commands.

Understanding Nomad

Nomad is built to be operationally simple. So simple that we can easily create an example cluster to play with on your local machine.

We are going to leverage Vagrant to automatically provision multiple machines that we can use to demonstrate container scheduling with Nomad. These machines will be: * Nomad server (1) * Consul server (1) * Docker host (3)

We will explain more about what each VM will do as we go. To get started, perform a git clone on nomad-intro. Make sure you have Vagrant installed.

git clone https://github.com/dontrebootme/nomad-intro
cd nomad-intro
vagrant up

This process starts and configures a Consul server, Nomad server, and some Docker hosts running Nomad and Consul agent. Once vagrant is done provisioning the VMs run vagrant status to confirm all instances are running:

➜  nomad-intro (master) ✔
 vagrant status
Current machine states:

consul                    running (virtualbox)
nomad                     running (virtualbox)
docker1                   running (virtualbox)
docker2                   running (virtualbox)
docker3                   running (virtualbox)

Nomad Server

Nomad running in server mode acts as the manager for the agents and applications in your cluster. A normal production cluster would have multiple Nomad servers for redundancy and failover. We describe how we want Nomad to run our applications by defining jobs. I've included a sample job with a task that launches a web server in the nomad-intro repository. The .nomad file defines a job, task group, and task. A job file will only ever describe a single job, but can have multiple tasks. Additional definitions in the job definition include data such as datacenter, region, instance count, update policy, resources allocated, networking speed, port allocations, and health checks.

In addition to nomad running the server, it also is the same binary used to interact with the cluster. To demonstrate how we schedule a job with nomad, take a look at the provided microbot.nomad file. You can run the microbot service on your cluster by issuing:

vagrant ssh nomad
nomad run /vagrant/microbot.nomad

Nomad will recieve the job definition and act on the request by scheduling the job on the agent nodes. You can view the status of the deployment with nomad status microbot.

Nomad Agent

Nomad running in agent mode will receive requests for tasks from the server and, if possible, act on those requests. In the example above we asked Nomad to start 9 instances of the microbot task which in this example are webservers running in a Docker container as defined by the job definition. We asked Nomad to allocate ports for the containers we launched and monitor the health of those services to act on them should the health check ever fail.

Consul

Consul is typically seen as two components, service discovery and distributed key value storage. We will focus on the service discovery portion of Consul for an automated way to discover and query our servers that may exist around our environment. Consul works well with Nomad, not surprisingly, because Nomad can automatically inform Consul of all running services, their host and port, and the health of the services.

With Nomad and Consul in sync, we can automate other systems such as the load balancer to automatically update when containers move or when containers are created and destroyed with scaling.

Further Experimentation:

Now that we've covered Nomad server, agent, and how we can leverage Consul for service discovery, let's do some further demonstrations of interacting with Nomad for tasks such as:

Scale the Microbot Service

Let's demonstrate the ability to use Nomad to scale a service. Open the microbot.nomad file with your favorite text editor and change the instance value from 9 to 50.

...
group "webs" {
  # We want 9 web servers initially
  count = 50

  task "microbot" {
    driver = "docker"
...

Once you're done, tell Nomad to about our changes by running:

vagrant ssh nomad
nomad run /vagrant/microbot.nomad

Nomad will look at the new job definition and make sure your cluster count matches what is already running. In this case it will scale the service up with an additional 41 containers.

Rolling Updates

To demonstrate a rolling update, let's look at our job file microbot.nomad once again.

...
# Rolling updates should follow this policy
update {
  stagger = "10s"
  max_parallel = 5
}
...

stagger defines the time between new container deployments and max_parallel sets how many containers can be stopped and started in parallel.

We can push a new version of our container out by changing the version of our microbot container image from v1 to v2 in the microbot.nomad file.

task "microbot" {
  driver = "docker"
  config {
    image = "dontrebootme/microbot:v2"
  }
  service {
    port = "http"

Once you push the new application with nomad run /vagrant/microbot.nomad the containers will be updated, 5 at a time with 10 seconds between each batch.

More information about updates are available via the Nomad documentation

System Jobs

Nomad has three types of jobs: service, batch, and system. Our previous example used a service job which is intended for long running tasks. Let's schedule a new job of type = "system". If you take a look at cadvisor.nomad, you'll see an example of a system job. System jobs are great for deploying services/tools that you expect to be on every host. You would usually use this type of job for logging, monitoring, and possibly a local docker registry. In this example we'll use the metrics service cAdvisor. Let's deploy this on every Nomad client/Docker host by issuing our nomad run with this new job definition:

vagrant ssh nomad
nomad run /vagrant/cadvisor.nomad

To verify that it is running on all hosts run:

vagrant ssh nomad
nomad status cadvisor

The cadvisor job should be scheduled, one per host, on your cluster.

Query Consul

One of the features of Nomad is that it has native integration with Consul. We've covered the relationship of Nomad and Consul above, but we can take a look at Consul and verify that it is indeed receiving all the information about our services by using Consul data in two ways, via an API call, or via the web UI.

To ask Consul for all running services in our cluster:

# List running services
curl -s http://10.7.0.15:8500/v1/catalog/services
# List information about our microbot service
curl -s http://10.7.0.15:8500/v1/catalog/service/microbot-web-microbot

Or we can visit the web UI by browsing to http://10.7.0.15:8500/ui/

Spin Down and Clean Up

When you're done, you can shut down the cluster using

vagrant halt

# And free up some disk space using
vagrant destroy -f

# If you want to change any of the configuration/scripts run
vagrant provision

Conclusion

There are numerous options for container cluster schedulers and the list isn't getting shorter. Nomad's approach to keep things operationally simple with less infrastructure needs is a relief when some schedulers seem overly complex. This model allows for fast automation and lean system requirements. We've learned how we can leverage Nomad to distribute a task around multiple hosts, scale the services, and deploy updates while letting the cluster scheduler handle the placement, supervision, and rolling updates. If you're ready to take your container infrastructure to the next level but are looking for a simple scheduler to deploy and manage then Nomad may be the container scheduler you've been waiting for.

7 comments :

Unknown said...

Thank you so much for sharing such a raw and honest post.

Unknown said...

Great presentation! And full of examples and straight forward! Thank you!
I am missing only the proof to connect to the microbot web. I would be interesting to see the actual web page.

Unknown said...

Mihai, in a more developed example, I would've included some service discovery/load balancer demonstrations as well.

You can manually query consul to find the microbot service host:port information. I've created a gist showing how I did this with this example: https://gist.github.com/dontrebootme/9402eec137ee7882789c

Unknown said...

Thanks a lot. worked,
Waiting forward to se Nomad to spawn an ELK cluster.
Would you happen to have anything like that? or a link maybe?
Thanks!

jhartmantestaccnt said...

Not many articles on firing up Nomad yet so glad to see this - thanks for posting. Followed the step exactly as listed to scale the microbot services from 9 => 50 instances, and upon looking in Consul UI, its never scaling up the number of microbot services. I've SSHd into the docker{1,2,3} machines (respectively), and running $: docker ps, each is only showing one running microbot service (along with cadvisor services). Have you ever seen this when you run the Vagrant example, or any idea if recent releases in either Nomad or Consul could be affecting it? Thanks again.

Anonymous said...

Very helpful article to get started. Thx! I wanted to check if "my" logging/monitoring agent (i'm the author of the docker-agent) runs on nomad. It gets all logs in a hosted ELK. I made this gist: https://gist.github.com/megastef/ff7b4dcac1e34d56b947

temistocles said...

Excellent article !

As I've had the same interest as suggested above by Mihai and Patrick, I've performed some research on putting a load balancer in front of the services deployed scheduled by Nomad, taking this post as the starting point.

Finally, I've accomplished it, and explained followed steps in a post in my blog. I share it here just in case it helps someone else:

https://promesante.github.io/2016/08/31/nomad_with_consul_and_haproxy/

Congrats and thanks !