December 7, 2011

Day 7 - Change and Proximity of Communication

This was written by Aaron Nichols (www.opsbs.com)

Whether we like it or not, we sysadmins are all about "me". When someone else sends an email about something, our interest in that thing is inversely proportional to the length of the email. When stuff breaks at 3AM and we know there was an email sent out about that, we go looking and can't find it - so we call the person who sent it.

There is a better way.

This post is about communication and documentation for day-to-day stuff. This is not the documentation you dig through when you have all day to sort out a problem. This is the stuff you want, now, without getting intimate with a search engine.

Pop the hood on any car, and you'll see an example of this documentation. Right there - all the stuff you are most likely to care about when you are looking under the hood. It doesn't matter if you've never driven this car or not: the documentation is placed as close to the problem as it can get.

Here are some examples.

Communication in your Config Management System

Today, most of your configuration-related changes should be distributed through some sort of CM system. Since this is where most folks will go looking for the status of things when they break, this is a great place to document the status of things as they are changing. Here are some examples using puppet as the CM.

Identify files that are managed by the CM system

The top of every file managed by your config management system should have a line that looks something like this:

# This file is managed by puppet - any changes made to this file
# directly will be deleted
# Source: puppet/modules/wibble/templates/wibble_a.erb

This makes it perfectly clear where to find this file if you want to edit it.

If you are moving things from one CM to another, tag the old ones too so people can tell which system is the source for a particular file.

Tell users about things they should know when they are running the CM manually or debugging it

If there's important information you want people to know about when they run your CM in debug mode (presumably looking for problems) you can usually add notifications. Comments in the code are great if someone is looking in the right place, but messaging like below directs them to that place:

In puppet you can use 'notify' for this:

class java {
  notify { "WARNING: This module (java) is experimental and may break things!":; }

And you should see something like this when you run the manifests by hand:

notice: WARNING: This module (java) is experimental and may break things!

If you are making major changes to your CM and you need people to be aware, send a short email out with a link to details. Make sure you include enough keywords to make it searchable later on, but short enough to ensure people read it:

Everyone,

I am renaming the 2 puppet modules 'wibble' and 'wobble'. I will be working on this over the next 2 days. This work is being done on the 'wibblewobble' branch. An explanation of these changes can be found here: http://wiki/why-wibblewobble-must-change

And add a notify to those modules warning users. Add comments to those modules where users will see them. Put links to your wiki in both places.

Leverage your MOTD

It's very common to be working on a system and need to let people know you do not want them making changes to the system or disturbing the state of things. It's fine to send email about this, but don't get stabby when someone forgets about your email at 4AM and "fixes" the system.

My preference is always to put a message in the MOTD telling them about this. Let's say I have stopped httpd on a system for a few days & I've acked the alert in Nagios - I will also add this to the MOTD:

***************************************************
NOTE: This system has httpd stopped for maintenance
We are resolving some network problems on this host
contact anichols@example.com if you have questions. 
Time of this message: 2011-12-06 13:55:01Z

If a script shouldn't be run - break it

In the above example we had httpd turned off because we were resolving some issues. If you are in an environment where enabling httpd would cause a service impacting event - make that harder to do.

If I want a script to stop running, and this includes init scripts or others, I will typically disable the script with an exit along with a message to let the user know:

start() {
        # SCRIPT DISABLED - anichols 2011/11/11
        # See http://wiki/why-I-disabled-httpd-on-this-host for more info
        echo "This script is disabled, see http://wiki/why-I-disabled-httpd-on-this-host for more detail"
        exit

So when someone tries to use it they see this:

[~]$ sudo /etc/init.d/httpd start
This script is disabled, see http://wiki/why-I-disabled-httpd-on-this-host for more detail

You can do fancy stuff like conditionals so certain users can run the script even, but the point is: Communicate what's going on and do it where the user will come in contact with the change.

If you have migrated to using a new tool, put a header on the old one

As an example, you are moving some graphing from cacti to Graphite, and you want users to know about it. You want to keep the old cacti instance up because it has valuable historical data you haven't moved yet, but you want folks to stop asking you why the cacti graphs aren't accurate.

At the top of cacti, in the header, put something like this:

<font color=red>
<strong>This cacti data is no longer updated</strong><br>
This data is here for archival purposes, for current data visit
http://awesome-graphite-url
</font>

It's simple and people will see it. If they don't - you can safely ignore their pleas of ignorance.

You get the point, the point is...

When you are working on systems and making changes, think about the other people who will come in contact with your change and how you can make it painfully obvious to them what is going on. Think about your own thoughtless patterns when you are bleary eyed at 3am: what would make it easy for you to know what is going on?

Further Reading

Like the example of car engine documentation being near the related area. There are many lessons we, as sysadmins and operations folks, can learn from other industries.

2 comments:

  1. i'd add a local instant comm server (like irc, xmpp conference, or - prefered by me - identica instance) which is being followed be all interested parties, and can be accessed by variety of devices. email may be overlooked, jabber too, user may never logout to see updated motd, and with twitter clone everyone can define how they wish to receive updates - mobile client, sms, email, xmpp, and what is the scope of their interest - by deploying hashtags. ie.

    !production !portal deploy in 5, don't touch puppet, please.

    ReplyDelete
  2. asq: Agreed, the more you can make a change visible as you do it, the better. The examples I gave were mostly focused on when folks are working with a change made in the past where they may not have seen, or may have forgotten about, anything they got via email/twitter/etc.

    ReplyDelete