December 8, 2011

Day 8 - Running services with systemd

This was written by Jordan Sissel (semicomplete.com).

In the past three years of sysadvent, I've covered various process monitor tools like monit, supervisord, and upstart. A little while back I put Fedora 15 on my laptop and found a new one, systemd.

Since every tool seems to invent different terminology for the same things, for the purposes of this article when I say 'process' or 'service' I mean the same thing - a systemd service.

So let's dig in a bit.

A First Look

The first thing you'll need to know is how to interact with systemd: starting and stopping things - the usual business. The main tool for this is systemctl. Run it with no arguments, and it gives you a list of all services. You can also ask for status:

% systemctl status rsyslog.service
rsyslog.service - System Logging Service
          Loaded: loaded (/lib/systemd/system/rsyslog.service)
          Active: active (running) since Tue, 06 Dec 2011 22:32:58 -0800; 1 day and 1h ago
        Main PID: 803 (rsyslogd)
          CGroup: name=systemd:/system/rsyslog.service
                  └ 803 /sbin/rsyslogd -n -c 5

From the above, you can see a few notable and strange things:

  • it's called "rsyslog.service" not simply "rsyslog"
  • the config file is in /lib/systemd/system/rsyslog.service
  • it's running, and for how long
  • the pid, and that it said 'main pid' indicating it might support child processes somehow
  • it uses cgroups.
  • and finally, the process command and arguments

A Sample Service

What's the config file look like?

[Unit]
Description=System Logging Service

[Service]
EnvironmentFile=-/etc/sysconfig/rsyslog
ExecStartPre=/bin/systemctl stop systemd-kmsg-syslogd.service
ExecStart=/sbin/rsyslogd -n $SYSLOGD_OPTIONS
Sockets=syslog.socket
StandardOutput=null

[Install]
WantedBy=multi-user.target

Most of the above should be fairly straight forward, though the 'unit' and 'install' sections have strange names. I'll explain it from top to bottom.

The 'Unit' section is documented in the systemd.unit(5) manpage. This section seems to cover things like ordering and dependencies. There's a separate section for defining the rsyslog service itself because systemd supports many more things than simply services, according to systemd.unit(5) -

A unit configuration file encodes information about a service, a socket, a device, a mount point, an automount point, a swap file or partition, a start-up target, a file system path or a timer controlled and supervised by systemd(1).

That's a lot of stuff, but I'm mainly interested in how to run things in systemd.

Controlling a Service

Let's stop it.

% sudo systemctl stop rsyslog.service

There's no output. If you run 'stop' again, it will again have no output and will still exit with success - a nice touch making scripted management easier. Check the status:

% sudo systemctl status rsyslog.service
rsyslog.service - System Logging Service
          Loaded: loaded (/lib/systemd/system/rsyslog.service)
          Active: inactive (dead) since Thu, 08 Dec 2011 00:36:46 -0800; 3s ago
        Main PID: 803 (code=exited, status=0/SUCCESS)
          CGroup: name=systemd:/system/rsyslog.service

Remember that stop and start only affect the current run-time and don't impact other events that might cause rsyslog to start (like the system booting). For that, you'll want enable and disable. You can disable things fairly intuitively:

% sudo systemctl disable rsyslog.service
rm '/etc/systemd/system/multi-user.target.wants/rsyslog.service'

And enable it again:

% sudo systemctl enable rsyslog.service 
ln -s '/lib/systemd/system/rsyslog.service' '/etc/systemd/system/multi-user.target.wants/rsyslog.service'

It's an odd thing. The 'stop' and 'start' commands output nothing, but 'enable' and 'disable' output shell commands? Additionally 'disable' and 'enable' do those actions for you, so I don't know what I am supposed to do with the output. Is systemd trying to encourage me to use those commands myself instead of using systemctl? By the way, if you enable an already-enabled service, you get no output and success. Same for disabling. Confusing!

Add Your Own Service

Here's the config file I used, and I put it in /lib/systemd/system/fizzle.service:

[Unit]
Description=Hello World

[Service]
ExecStart=/bin/sh -c 'echo Hello World; sleep 5'
StandardOutput=syslog
StandardError=syslog

[Install]
WantedBy=multi-user.target

Nothing else is required to make systemctl aware of our new service, so we can start it normally like shown before:

% sudo systemctl start fizzle.service

And since I told it to take stdout and ship it over syslog, /var/log/messages has the output:

% grep 'Hello' /var/log/messages
Dec  7 17:45:26 nightfall sh[22616]: Hello World

That's a nice feature and is similar to supervisord and daemontools (with multilog).

Checking the status, I see it has died:

% systemctl status fizzle.service
fizzle.service - Hello World
          Loaded: loaded (/lib/systemd/system/fizzle.service)
          Active: inactive (dead)
          CGroup: name=systemd:/system/fizzle.service

I don't want it to be dead. As described in past sysadvents covering process monitoring, "if it dies, restart it." What can be done? The systemd.service(5) manpage says to add 'Restart=always' to the 'Service' section.

Once that is added, starting 'fizzle.service' again will get it rolling. After 5 seconds it will die and be started by systemd:

% sudo systemctl status fizzle.service | grep 'Active'
          Active: activating (auto-restart) since Thu, 08 Dec 2011 00:52:50 -0800; 5s ago
% sudo systemctl status fizzle.service
          Active: active (running) since Thu, 08 Dec 2011 00:52:55 -0800; 771ms ago

Supporting Odd Services

I originally wanted to use nagios as the example, not rsyslog as above, but when installing nagios on Fedora 15, I received the usual /etc/init.d/nagios startup script. However, when I ran it, I saw this output:

% sudo /etc/init.d/nagios start
Starting nagios (via systemctl):                           [  OK  ]

Huh? I thought that was strange, and when I dug into the script, I saw no mention of systemctl. It loads /etc/init.d/functions which, by default, seems to pass itself into systemctl. Asking systemctl what's up, it says:

% systemctl status nagios.service
nagios.service - SYSV: Starts and stops the Nagios monitor
          Loaded: loaded (/etc/rc.d/init.d/nagios)
          Active: active (running) since Thu, 08 Dec 2011 00:59:22 -0800; 31s ago
         Process: 23567 ExecStop=/etc/rc.d/init.d/nagios stop (code=exited, status=0/SUCCESS)
         Process: 23590 ExecStart=/etc/rc.d/init.d/nagios start (code=exited, status=0/SUCCESS)
        Main PID: 23601 (nagios)
          CGroup: name=systemd:/system/nagios.service
                  └ 23601 /usr/sbin/nagios -d /etc/nagios/nagios.cfg

Funky, though it shows two features of systemd. First, it supports old sysv init scripts. Second, having explicit 'ExecStart' and 'ExecStop' settings can be useful in putting together systemd and software that insists on being run with its own management tools to stop and start.

Concerns

This section is more sourced from my feelings on systemd than from facts, so take this with a grain of salt.

My first problem with systemd is the huge feature list. It looks to be trying to replace /sbin/init, SYSV init scripts and runlevels, inetd, udevd, automount, and supports cgroups, inotify, and more. That's a pretty big feature space, and it reflects in the size of the code base. At this time of writing, the lines of code in systemd around 82000 lines of code. Of those, only about 1000 are tests. Only 1.2% of the code appears to be tests? Yikes.

Further, systemd is a major consolidation of several components of the system. I don't really want software replacing major components (/sbin/init, cron, etc) with practically no tests and a fixation on problems I don't have. A bug in cron doesn't crash init, but now it just might.

Lastly, systemd relies on DBus. It's pretty rare for sysadmins to have work experience with DBus. It's another layer to debug when things break. Are there debugging tools? I hope I'm just failing to google for this, but I always come up empty when looking for a decent tracing tool for DBus messages - all the ones I run across are graphical.

The above problems are not terrible things on desktops which tend to have much looser expectations on software reliability and more flexibility on outages. However, put these on a server, and what do you have? DBus usage, major software consolidation into a single binary, 82000 lines of code and basically no tests - all this adds up to great worry and concern. How long until systemd ships with RHEL or your preferred production Linux distribution?

Conclusion

As stated, please take my opionated concerns detailed above for what they are - they are not facts. I'm not writing off systemd as a failure by any stretch.

Systemd itself has some fairly nice features for running services. Pretty much anything you'd want to configure for a service is available: cgroups, user, oom tuning, output logging, cpu and I/O tuning, etc. The command line tools and documentation are also pretty good. It's the default on all Fedora 15 and newer releases, and you can get it on many other Linux distributions, so go on and play with it!

Further Reading

  • Slides giving an overview of systemd

2 comments:

  1. dbus-monitor is a text-mode dbus tracing tool.

    ReplyDelete
  2. enable and disable show you exactly what they're doing. the symlinks hold the information on what's enabled and what's not. so they don't get set a second time. you could alternatively do that manually.

    ReplyDelete